Agilent E5052-90007 Prep for mounting E5052B Spare HDD and Prep for connecting with E5053A c20141022 [2] free download

File name E5052-90007 Prep for mounting E5052B Spare HDD and Prep for connecting with E5053A c20141022 [2].pdf

Keysight Part No. E5052-90007 Print Date: August 2014 Caution Prep for mounting E5052B Spare HDD Dear Valued Customer, When you receive the E5052B with FW A.03.30 or above, see below If you swap your Spare HDD (Hard Disk Drive) with the mounted HDD in the E5052B, you need to update Firmware, Syscal data and Limit files. For details, follow the procedure in E5052B HELP. (http://ssa.tm.keysight.com/e5052b/manuals/webhelp/eng) Home > Product Information > Maintenance > Removing/Mounting Removable Hard Disk Step 1. Saving system calibration data from removable hard disk to USB pen drive Step 2. Removing Removable Hard Disk Step 3. Mounting Removable Hard Disk Step 4. Recalling System Calibration Data from USB Pen drive to Removable Hard Disk Keysight Part No. E5052-90007 Print Date: August 2014 Prep for connecting with E5053A Dear Valued Customer, When you receive the E5053A with serial number MY452xxxxx, SG452xxxxx or above, or its equivalent repair, see below. For E5052B user If you connect the E5053A with your E5052B, you need to update the Firmware to FW A.03.30 or above onto your E5052B. Firmware A.03.30 or above automatically install the USB drivers for the E5053A with MY452xxxxx, SG452xxxxx or above. Otherwise, you see "The wizard could not find the software on your computer for..." message on "Found New Hardware Wizard" dialog box. For E5052A user If you connect the E5053A with your E5052A, you need to update the USB drivers manually. Otherwise, you see "Type the path where the file is located, and then click OK" message on "Files Needed" dialog box. Step 1. Download E5053A USB Drivers (e5053.inf and e5053ld2.sys) from Keysight.com to your USB pen drive. http://www.keysight.com/find/e5052b-firmware Step 2. Disconnect the USB cable between your E5052A and the E5053A and Turn off the E5053A. Step 3. Insert your USB pen drive to your E5052A Step 4. Replace e5053.inf and Copy e5053ld2.sys to C:\Windows\PNPDRVRS\Keysight\ Step 5. Turn on the E5053A and Connect the USB cable between your E5052A and the E5053A. End of Document